From: Marko Mäkelä (marko.makela_at_hut.fi)
Date: 2003-03-13 21:33:50
On Thu, Mar 13, 2003 at 08:03:08PM +0100, Nicolas Welte wrote:
> >btw you know of any "official" rs232 hardware that would work with the
> >8032sk marko? :)
>
> Hehe, I'm not Marko, but the answer is almost obvious: If you put the
> SuperPET board into the 8032-SK, it will have an official RS232 hardware
> :-)
I tried this some time ago, but unfortunately the SuperPET daughterboard
is a bit too large to fit inside the 8032-SK case. It would perhaps fit
if the power supply was removed.
The reason why I asked if the 6551 driver in the cc65 runtime library would
also support the plus/4 is that the 6551 driver in cbmlink apparently doesn't
work with the swiftlink cartridge for the C64, although it does work on
the plus/4. Could anyone (besides MagerValp) test it? The driver doesn't
use interrupts, only polling.
Marko
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail 2.1.6.