On 10/14/17 3:38 AM, vossi wrote: > I have SFD1001 connected to my Mac. > cbmctrl with dir, read and write works with 8050 disks (500k) in my sfd1001 > in the second try - linke on a real cbm machine. > But d82copy does not copy 500k-images to my sfd1001... > I treid all parameter, but a 500k disk in the 1MB drive does not work with > d82copy! I use an SFD-1001 to image 8050 disks using OpenCBM. I first put the drive into single-sided mode using these commands (assumes device number 8): $ cbmctrl -p command 8 m-w 172 16 1 1 $ cbmctrl -p command 8 m-w 195 16 1 0 $ cbmctrl -p command 8 u9 The commands above are based on an old email from Nicolas Welte: http://www.softwolves.com/arkiv/cbm-hackers/2/2411.html Once the drive is in single-sided mode, I use d82copy with the "-1" (single-sided) option. Regards, Mike -- Mike Naberezny (mike@naberezny.com) http://6502.org Message was sent through the cbm-hackers mailing listReceived on 2017-10-14 21:00:03
Archive generated by hypermail 2.2.0.