Re: read/write 8050-image with cbmctrl in 1001?

From: Spiro Trikaliotis <*ml-cbmhackers_at_trikaliotis.net*> Date: Sat, 14 Oct 2017 21:43:28 +0200 Message-ID: <20171014194328.GB29996@hermes.local.trikaliotis.net> · ml-cbmhackers_at_trikaliotis.net

Hello,

* On Sat, Oct 14, 2017 at 02:39:17PM +0200 Christian Dirks wrote:
> Am 14.10.2017 um 12:38 schrieb vossi:
> > I have SFD1001 connected to my Mac.
> > cbmctrl with dir, read and write works with 8050 disks (500k) in my sfd1001
> > in the second try - linke on a real cbm machine.
> > But d82copy does not copy 500k-images to my sfd1001...
> > I treid all parameter, but a 500k disk in the 1MB drive does not work with
> > d82copy!
> > 
> I also came along this problem years ago.
> The 8250 and 1001 switch to 8050 mode on the second try to read the
> disk.

Is there an option to do this switch programmatically? That is, what
should d82copy and cbmcopy do in order to make this happen
automatically?

> So d82copy should be fixed, but it seems a bit abandoned. :(

Like all OpenCBM tools? ;)

Regards,
Spiro.

-- 
Spiro R. Trikaliotis
http://www.trikaliotis.net/

       Message was sent through the cbm-hackers mailing list