I'm not sure where to look. Chip dates are: - 326298 Rev A - 6502 date: Week 48 82 - 326298 Rev C - 6502 date: Week 29 82 I still don't get Commodore dates vs revisions. On Fri, Feb 17, 2017 at 5:17 PM, Bo Herrmannsen <bo.herrmannsen@gmail.com> wrote: > Can you see any production dates on the Rev A and Rev C ? > > 2017-02-17 23:14 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: > >> Slight change to my last message. I have two boards plus a couple of >> extra C64 Silver labels that I don't know what's inside at this point. >> >> The open ones have: >> - 326298 Rev A >> - 326298 Rev C >> >> That picture is a Rev C. >> >> On Fri, Feb 17, 2017 at 5:13 PM, Bo Herrmannsen <bo.herrmannsen@gmail.com >> > wrote: >> >>> would it be pushing it using a scanner for that? >>> >>> benefits are able to get better image... >>> >>> does the board look the same as this: http://myoldcomputer.nl/ >>> wp-content/uploads/2015/11/board-326298.jpg >>> >>> but i need details arround RP4 and L4 >>> >>> >>> >>> 2017-02-17 23:07 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>: >>> >>>> I have a C64 326298 board in front of me. It's not for sale but I'm >>>> happy to take detailed pics if you need them. >>>> >>>> On Fri, Feb 17, 2017 at 4:47 PM, Bo Herrmannsen < >>>> bo.herrmannsen@gmail.com> wrote: >>>> >>>>> also C48 and C93 is missing >>>>> >>>>> 2017-02-17 22:24 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: >>>>> >>>>>> @Ruud >>>>>> >>>>>> Found some errors in your schematic >>>>>> >>>>>> U31 pin 16 is missing >>>>>> C68 is missing >>>>>> >>>>>> 2017-02-17 21:37 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: >>>>>> >>>>>>> @Silver no problemo... its no rush. I'm still getting my head to >>>>>>> absorb the schematic from the Programmer's Reference Guide and schematic >>>>>>> #326106. There are a few differences allready between the 2 and so far i >>>>>>> have just put a circle arround them >>>>>>> >>>>>>> But so far RP4 and L4 is the mystery bits. L4 is just listed as a >>>>>>> line filter with no values at all or any mfg code. all i know is that its 2 >>>>>>> inductors in one unit >>>>>>> >>>>>>> RP4 is a resistor pack with one common pin, but given its listed as >>>>>>> a 10 pin device there are 9 resistors inside, but i can only count 8 on the >>>>>>> schematic so i guess 1 is unused. >>>>>>> >>>>>>> 2017-02-17 21:23 GMT+01:00 <silverdr@wfmh.org.pl>: >>>>>>> >>>>>>>> >>>>>>>> > On 2017-02-17, at 20:55, Bo Herrmannsen <bo.herrmannsen@gmail.com> >>>>>>>> wrote: >>>>>>>> > >>>>>>>> > @Silver >>>>>>>> > >>>>>>>> > When you come by the 326298 please let me know. >>>>>>>> >>>>>>>> As I wrote, I should have one somewhere. The keyword here is >>>>>>>> "somewhere". So I might have a quick look but if it's not easily found then >>>>>>>> I won't be able to dedicate enough time to dig it out. And - obviously - it >>>>>>>> won't be for sale but I might check a thing or two for you if needed. >>>>>>>> >>>>>>>> BTW. Some time ago I had a short discussion about VIC-20 boards >>>>>>>> here. I don't remember know exactly with whom but if the person who wanted >>>>>>>> me to check things on those boards reads the list - please come back with >>>>>>>> your question again. Seems that I managed to gather /I think/ all my >>>>>>>> VIC-20s under one roof so I can check whatever you wanted to check there. >>>>>>>> >>>>>>>> -- >>>>>>>> SD! >>>>>>>> >>>>>>>> >>>>>>>> Message was sent through the cbm-hackers mailing list >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > Message was sent through the cbm-hackers mailing listReceived on 2017-02-17 23:01:09
Archive generated by hypermail 2.2.0.