Re: Is it at all possible?

From: Bo Herrmannsen <bo.herrmannsen_at_gmail.com>
Date: Fri, 17 Feb 2017 23:17:03 +0100
Message-ID: <CAFqpYu7FZY14xmHRypd2XF7zMTaiVxgUK+HYhxZARUynvzxhUw@mail.gmail.com>
Can you see any production dates on the Rev A and Rev C ?

2017-02-17 23:14 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>:

> Slight change to my last message.  I have two boards plus a couple of
> extra C64 Silver labels that I don't know what's inside at this point.
>
> The open ones have:
> - 326298 Rev A
> - 326298 Rev C
>
> That picture is a Rev C.
>
> On Fri, Feb 17, 2017 at 5:13 PM, Bo Herrmannsen <bo.herrmannsen@gmail.com>
> wrote:
>
>> would it be pushing it using a scanner for that?
>>
>> benefits are able to get better image...
>>
>> does the board look the same as this: http://myoldcomputer.nl/
>> wp-content/uploads/2015/11/board-326298.jpg
>>
>> but i need details arround RP4 and L4
>>
>>
>>
>> 2017-02-17 23:07 GMT+01:00 Santo Nucifora <santo.nucifora@gmail.com>:
>>
>>> I have a C64 326298 board in front of me.  It's not for sale but I'm
>>> happy to take detailed pics if you need them.
>>>
>>> On Fri, Feb 17, 2017 at 4:47 PM, Bo Herrmannsen <
>>> bo.herrmannsen@gmail.com> wrote:
>>>
>>>> also C48 and C93 is missing
>>>>
>>>> 2017-02-17 22:24 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>:
>>>>
>>>>> @Ruud
>>>>>
>>>>> Found some errors in your schematic
>>>>>
>>>>> U31 pin 16 is missing
>>>>> C68 is missing
>>>>>
>>>>> 2017-02-17 21:37 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>:
>>>>>
>>>>>> @Silver no problemo... its no rush. I'm still getting my head to
>>>>>> absorb the schematic from the Programmer's Reference Guide and schematic
>>>>>> #326106. There are a few differences allready between the 2 and so far i
>>>>>> have just put a circle arround them
>>>>>>
>>>>>> But so far RP4 and L4 is the mystery bits. L4 is just listed as a
>>>>>> line filter with no values at all or any mfg code. all i know is that its 2
>>>>>> inductors in one unit
>>>>>>
>>>>>> RP4 is a resistor pack with one common pin, but given its listed as a
>>>>>> 10 pin device there are 9 resistors inside, but i can only count 8 on the
>>>>>> schematic so i guess 1 is unused.
>>>>>>
>>>>>> 2017-02-17 21:23 GMT+01:00 <silverdr@wfmh.org.pl>:
>>>>>>
>>>>>>>
>>>>>>> > On 2017-02-17, at 20:55, Bo Herrmannsen <bo.herrmannsen@gmail.com>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> > @Silver
>>>>>>> >
>>>>>>> > When you come by the 326298 please let me know.
>>>>>>>
>>>>>>> As I wrote, I should have one somewhere. The keyword here is
>>>>>>> "somewhere". So I might have a quick look but if it's not easily found then
>>>>>>> I won't be able to dedicate enough time to dig it out. And - obviously - it
>>>>>>> won't be for sale but I might check a thing or two for you if needed.
>>>>>>>
>>>>>>> BTW. Some time ago I had a short discussion about VIC-20 boards
>>>>>>> here. I don't remember know exactly with whom but if the person who wanted
>>>>>>> me to check things on those boards reads the list - please come back with
>>>>>>> your question again. Seems that I managed to gather /I think/ all my
>>>>>>> VIC-20s under one roof so I can check whatever you wanted to check there.
>>>>>>>
>>>>>>> --
>>>>>>> SD!
>>>>>>>
>>>>>>>
>>>>>>>        Message was sent through the cbm-hackers mailing list
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>


       Message was sent through the cbm-hackers mailing list
Received on 2017-02-17 23:00:54

Archive generated by hypermail 2.2.0.