On 2013-06-20, at 11:34, Michał Pleban wrote: > I tried the raster line trick and it works well - the bytes are written > to the Flash when VIC draws the border and the screen is intact. But > there is another problem, however :-( To write to the Flash, I need > first to erase a 4kB sector, which takes about 25ms (according to the > chip specs). That means that the screen is garbled for about one video > frame per each sector erased, and this cannot be avoided. > > Therefore I think I'll just copy the CHAR data to RAM during chip > prgoramming. As long as you have enough RAM available, I think this is the most sound idea. Move charset to RAM, switch VIC away from the ROM, do the flashing, restore original settings. -- SD! Message was sent through the cbm-hackers mailing listReceived on 2013-06-20 10:01:39
Archive generated by hypermail 2.2.0.