Re: Kits received -> 40-pint holes for 40 pin socket.

From: B. Degnan (billdeg_at_degnanco.com)
Date: 2008-01-22 01:24:42

Next message: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Previous message: M H Stein: "24 pin 64K EPROMS"
In reply to: Mike Naberezny: "Re: Kits received -> HW question"
Next in thread: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Reply: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

>
>I received my board on Friday and assembled it today.  Thanks to all who 
>have helped realize this project, particularly Ruud, Jim, and Al.
>
>The holes for the 40-pin socket appeared to be a bit smaller than the 
>others.  I could not get the 40-pin socket included with the kit to fit in 
>these holes easily.  I enlarged the holes slightly and then a socket with 
>machine-tooled pins just fit.

Thanks for the picks, Mike.

I too had the same problem with the 40 pin socket.  I put in a call to a 
friend who has tools to enlarge the holes.  For now I am on hold.

Bill D



       Message was sent through the cbm-hackers mailing list

Next message: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Previous message: M H Stein: "24 pin 64K EPROMS"
In reply to: Mike Naberezny: "Re: Kits received -> HW question"
Next in thread: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Reply: Jim Brain: "Re: Kits received -> 40-pint holes for 40 pin socket."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Archive generated by hypermail pre-2.1.8.