From: Niklas Ramsberg (niklas.ramsberg_at_swipnet.se)
Date: 2003-09-30 18:12:35
Hej allihopa!
I bought a Datalux SV-703 cartridge expander in the hope of being able
to use my RetroReplay/RR-Net combo together with my 512K REU, but so far
they're not happy together.
The expander has three ports and a switch that switches +5V (pins 2 & 3,
which are shorted on the card edge), GAME (pin 8) and EXROM (pin 9). All
other pins on all ports stay connected all the time.
When I switch to the RetroReplay, everything works fine, but the
computer doesn't recognise the REU. When I switch to the REU, the screen
goes blank and the disk drive keeps spinning with the read LED on. The
REU works fine when I physically remove the RetroReplay.
The latest RetroReplay firmware is supposed to be REU friendly.
Is it possible to hack the expander to make it work as expected?
I use a PAL C128 with JiffyDOS if that makes any difference.
/Niklas Ramsberg
aka
< .
(:) Bacon
< .
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.