From: Niklas Ramsberg (niklas.ramsberg_at_swipnet.se)
Date: 2003-01-02 11:20:10
Hej allihopa!
OK, so I've read what little info I could find on this subject and come
to this conclusion: If I bend the A15 pin on the 27C512 out of the
socket and connect a switch between A15 and ground and a 4.7kOhm
pull-up resistor between A15 and VCC, I should be able to switch between
the lower and higher 32K in the EPROM, right?
/Niklas Ramsberg
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail 2.1.4.