Re: CMD Smart Mouse wires

Hi Terry

Maybe you can see something here 
https://www.forum64.de/index.php?thread/144281-commodore-64-1351-mouse/&pageNo=2

André

Am 30. Juli 2025 21:33:27 schrieb Terry Raymond <traymond160_at_gmail.com>:
> This is Terry Raymond
>
> Hi has anyone here ever owned a CMD Smart Mouse?
> the problem with this mouse was it had no Joystick wire restrainers so the 
> wires wiggled
> (inside the mouse case) so the wires after a time would break right at the 
> solder joint,
> more to the front part of the PCB.
>
> I of course own one and yeah all the wires broke so I have no idea where 
> they all
> belong or connect to on the PCB.
> If anyone else owns a Smart Mouse if you could possibly do me a favor, please:
> take the case apart and again towards the front part of the PCB is where 
> the Joystick
> wires solder down,  take a picture of that area, again a very closeup picture.
> Or if you have a scanner even a closeup scan would probably work.
> Only Im going to use an Atari 2600 joystick cable, the aftermarket Joystick 
> cable CMD used
> the wires were hair thin and a pain to mess with.
>
>  This mouse worked fine just the wires Im not sure of, but this is the only 
>  way I could figure this out so I appreciate any help with this.
>
> email me the pictures to
> traymond160_at_gmail.com