Re: VIC-42

From: smf <>
Date: Thu, 24 Jun 2021 17:26:09 +0100
Message-ID: <>
My guess would be bond out wires to pads on the carrier which are left
clear when applying the ceramic (using a special mould).

It's possible the pins are attached before applying the ceramic too,
you'd need to disect one to know for sure.

On 24/06/2021 16:27, Jim Brain wrote:

> The little PCB I completely understand and it makes sense to me. What
> I'm confused on is how the little 24 pin EPROM socket's lines get
> under the ceramic packaging and back to the die...
Received on 2021-06-24 19:00:53

Archive generated by hypermail 2.3.0.