* On Mon, Jun 04, 2018 at 02:58:27PM +0200 André Fachat wrote: > Just for your info, I think I found the problem and spiro already merged the > fix. André was so kind to also generate a firmware for testing. It would be nice if this could be tested with as many IEEE drives as possible, as it changes the timing. Especially the 2031 (which is known to not be working before the patch) and a 8x50 or SFD 1001 (which are known to be working before the patch) would be very interesting. If anyone has some time for this, the binary of André is here: https://raw.githubusercontent.com/fachat/OpenCBM/eeba73c7c06dd12c3cd95b2a683cd0d6b8fed1eb/xum1541/xum1541-ZOOMFLOPPY-v99.hex Note that I specifically asked André to change to version of the binary, so we can recognise it. It is know at version "99", don't be surprised. For Windows users, you also need an adjusted .inf file. Thank you for your help, and especially thanks to André for this find. Regards, Spiro. -- Spiro R. Trikaliotis http://www.trikaliotis.net/Received on 2018-06-04 22:00:04
Archive generated by hypermail 2.2.0.