didier derny <didier@aida.org> writes: > I've seen somewhere that HDMI could be done with a spartan 6... Yes, the Spartan 6 I/O blocks support TMDS signalling. It can also be done with the Spartan 3A (but not 3 or 3E). > my boards are mostly spartan 3 / Cyclone II (DE1) Some people have successfully used a Cyclone II to output HDMI directly from the FPGA pins - although it doesn't support "real" TMDS outputs, the signal is usually acceptable when the cable is short enough. One project that uses a Cyclone II to add an HDMI output to a Neo Geo is this one: https://github.com/charcole/NeoGeoHDMI -ik Message was sent through the cbm-hackers mailing listReceived on 2016-01-18 21:00:55
Archive generated by hypermail 2.2.0.