RE: commodore c116 starting in the monitor instead of the basic

Hi, you are right, the software was not correctly releasing the keys at
keyUP

And the mapping is bad, I tried to find the correct mapping in Vice source
as 

Suggested by Andre, but it's huge and I've not found anything


The C116 is working perfectly, the problems comes from my interface.

[it was the first try] :)

--
didier

-----Message d'origine-----
De : owner-cbm-hackers@musoftware.de
[mailto:owner-cbm-hackers@musoftware.de] De la part de Gerrit Heitsch
Envoyé : mercredi 26 novembre 2014 22:32
À : cbm-hackers@musoftware.de
Objet : Re: commodore c116 starting in the monitor instead of the basic

On 11/26/2014 10:15 PM, didier derny wrote:
> My commodore 116 is starting in the monitor at power up instead of the 
> basic
>
> I’m experimenting my usb interface for the commodore 116
>
> It’s the first time I connect it….
>
> Some characters are working, visibly when I it a key it the key is 
> displayed on the screen
>
> (my table is only partial, I only have letters)
>
> The deselection at key up is not correct
>
> But this c116 entering the monitor at power up is a mistery…
>
> On the pet there was a way to enter the monitor from a line on the 
> user port
>
> But no user port on the  C116
>
> Any idea ?

If you press RUN/STOP on a 264 during power up or a reset, you will end up
in the monitor, so it could be a keyboard problem. This feature seems to be
meant as a replacement for the RESTORE key on the C64.

I also had that problem with a partially dead ROM once.

Do you have another 264? If yes, try the ICs from the C116 there one by one.

  Gerrit



       Message was sent through the cbm-hackers mailing list


       Message was sent through the cbm-hackers mailing list