On 11/26/2014 10:15 PM, didier derny wrote: > My commodore 116 is starting in the monitor at power up instead of the basic > > I’m experimenting my usb interface for the commodore 116 > > It’s the first time I connect it…. > > Some characters are working, visibly when I it a key it the key is > displayed on the screen > > (my table is only partial, I only have letters) > > The deselection at key up is not correct > > But this c116 entering the monitor at power up is a mistery… > > On the pet there was a way to enter the monitor from a line on the user port > > But no user port on the C116 > > Any idea ? If you press RUN/STOP on a 264 during power up or a reset, you will end up in the monitor, so it could be a keyboard problem. This feature seems to be meant as a replacement for the RESTORE key on the C64. I also had that problem with a partially dead ROM once. Do you have another 264? If yes, try the ICs from the C116 there one by one. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2014-11-26 22:00:02
Archive generated by hypermail 2.2.0.