Re: PET diagnostics

From: Philip Lord <philip_at_neoncluster.com>
Date: Thu, 12 Dec 2013 13:49:48 +0900
Message-Id: <FFC0B9B6-DDA5-41FA-947B-56F1255F6888@neoncluster.com>
I don't know if this is useful information, but I know Ruud Baltissen (from the VCF forums) wrote a very simple test kernal ROM replacement that that can be burnt to a single EPROM and displays the complete character set on the screen. Very useful for testing and troubleshooting.

Philip


On Dec 12, 2013, at 9:05 AM, Steve Gray <sjgray@rogers.com> wrote:

> Sure, sounds good!
> 
> Steve
> 
> 
> On Dec 11, 2013, at 6:10 PM, Rob Clarke <crock@clarke-family.org.uk> wrote:
> 
>> Hi Christian,
>> 
>> i just scanned the "Testing the PET Computer" document that covers how it works. You can find it here:
>> 
>> http://www.inchocks.co.uk/commodore/PET/Testing_The_PET_Computer.pdf
>> 
>> The additional test programs referenced in the doc came on a set of tapes ( http://www.inchocks.co.uk/commodore/PET/Tapes.jpg ) most of which which you can find here: http://www.inchocks.co.uk/commodore/PET/ServicePackTapes.zip
>> 
>> Steve, I wrote a PET diagnostic routine which tests the RAM and CRC checksums the ROM's which you're welcome to include.
>> 
>> Rob
>> 
>> On 11/12/2013 21:34, Christian Dirks wrote:
>>> Hi Rob,
>>> the used ROM set should be basic 1 according to
>>> http://zimmers.net/anonftp/pub/cbm/firmware/computers/pet/README.also
>>> I found a youtube video that claims to show 'A successful pass of the
>>> diagnostic rom': http://www.youtube.com/watch?v=l5E8mpfBbZg
>>> Unfortunately no further information :(
>>> Could you take a look at the documentation and dongles ?
>>> 
>>> Christian
>>> 
>>> Am 11.12.2013 21:13, schrieb Rob Clarke:
>>>> Yes, but it was only in the basic 1 ROM set. I have an original set of
>>>> documentation and dongles somewhere if you can't find it on-line.
>>>> 
>>>> I don't recall if it displays anything though, I think it used the red
>>>> LED on the mainboard.
>>>> 
>>>> Rob
>>>> 
>>>> On 11/12/2013 21:08, Christian Dirks wrote:
>>>>> Hi all,
>>>>> does anyone know, if there really is a diagnostic routine in the PET
>>>>> ROMs, and if so, what it should do/display ?
>>>>> When I power up my 2001-8C with the daignostic pin connected to GND, it
>>>>> blanks the screen and nothing more seems to happen.
>>>>> A quick test with a 'hello world' basic program works.
>>>>> The used ROM set is:
>>>>> 6540-019, -013, -015, -016, -012, -014, -018.
>>>>> 
>>>> 
>>>>      Message was sent through the cbm-hackers mailing list
>>> 
>> 
>> 
>>     Message was sent through the cbm-hackers mailing list
> 
>       Message was sent through the cbm-hackers mailing list


       Message was sent through the cbm-hackers mailing list
Received on 2013-12-12 05:00:04

Archive generated by hypermail 2.2.0.