Re: Multi-ROM built, what now?

From: Steve Gray <sjgray_at_rogers.com>
Date: Mon, 3 Jun 2013 06:27:56 -0700 (PDT)
Message-ID: <1370266076.91781.YahooMailNeo@web161305.mail.bf1.yahoo.com>
What no votes for porting the Plus/4's "3+1" software? ;-)
 
I think BASIC7 would be my choice. For sheer impressiveness I'd say what about GEOS?! (is it even feasible?)
 
Steve


>________________________________
> From: "Baltissen, GJPAA (Ruud)" <ruud.baltissen@apg.nl>
>To: "'cbm-hackers@musoftware.de'" <cbm-hackers@musoftware.de> 
>Sent: Monday, June 3, 2013 2:20:33 AM
>Subject: Multi-ROM built, what now?
>  
>
>Hallo allemaal,
>
>
>Yesterday I sent an email from home but this morning I didn't see it in my box. So once again...
>
>I finished building the hardware enabling me to choose a ROM combination. This can be done using an extra 6522. This also means I can implement a ROM that needs more than the standard 16 KB using the paging method. But now the question: where can I use it for?
>
>I have give it a thought myself and had some ideas but none that brought me in the "YES !!!" mood:
>- using the experience I have with 1541IDE to couple a harddisk directly to a VIC-20. 
>- a Pascal or C interpreter/compiler instead of of BASIC
>- integrating BASIC 7.0 
>- LUnix or André's GeckoOS
>
>I'm also busy with soldering an ISA interface so the software for coupling a harddisk directly to a VIC-20 has to be programmed anyway but then I will use the memory available on the ISA bus. As I will use a 65816 as well, no paging needed.
>
>So your input is more then welcome !!!
>
>
>Then especially for Boisy: where can I get your PCB? The VIC-20 has a 6502 so replacement shouldn't be a problem. TIA!
>
>
>--
>     ___
>    / __|__
>   / /  |_/     Groetjes, Ruud Baltissen
>   \ \__|_\
>    \___|      http://ruud.c64.org/
>
>
>  
>
>De informatie in dit e-mailbericht is vertrouwelijk en uitsluitend bestemd voor de 
>geadresseerde. Wanneer u dit bericht per abuis ontvangt, verzoeken wij u contact op te 
>nemen met de afzender per kerende e-mail. Verder verzoeken wij u in dat geval dit 
>e-mailbericht te vernietigen en de inhoud ervan aan niemand openbaar te maken. 
>Wij aanvaarden geen aansprakelijkheid voor onjuiste, onvolledige dan wel ontijdige 
>overbrenging van de inhoud van een verzonden e-mailbericht, noch voor daarbij 
>overgebrachte virussen.
>
>APG Algemene Pensioen Groep NV is gevestigd te Heerlen en is ingeschreven in het 
>handelsregister van de Kamer van Koophandel Limburg onder nummer 14099617
>
>
>The information contained in this e-mail is confidential and may be privileged. 
>It may be read, copied and used only by the intended recipient. 
>If you have received it in error, please contact the sender immediately by 
>return e-mail; please delete in this case the e-mail and do not disclose its 
>contents to any person. We don't accept liability for any errors, omissions, 
>delays of receipt or viruses in the contents of this message which arise as a 
>result of e-mail transmission.
>
>APG Algemene Pensioen Groep NV is registered in the trade register of the Chamber 
>of Commerce Limburg, The Netherlands, registration number: 14099617
>
>
>       Message was sent through the cbm-hackers mailing list
>
>    

       Message was sent through the cbm-hackers mailing list
Received on 2013-06-03 14:00:03

Archive generated by hypermail 2.2.0.