Re: CBM610 PSU - 220V or 110V?

From: Christian Dirks <>
Date: Thu, 28 Mar 2013 21:35:43 +0100
Message-ID: <>
Am 28.03.2013 21:05, schrieb Michał Pleban:
>> Michau,
>> the transformer should give an output of 2 x 16V.
>> Without the pcb connected, mine gives about 2 x 17,8V.
>> Input is 232V.
> That's a good suggestion, however since the PSU blows the fuse, there is
> no output voltage at all :-)
Does it blow the fuse, if you disconnect the pcb from the transformer ?
If it does, it doesn't matter if it's 220V or 110V, because the the 
transformer is faulty, and I think this is the only part that differs on 
the 110V ans 220V version of the psu.

Christian Dirks

       Message was sent through the cbm-hackers mailing list
Received on 2013-03-28 21:01:19

Archive generated by hypermail 2.2.0.