On 02/03/2013 10:48 PM, Gábor Lénárt wrote: > On Sun, Feb 03, 2013 at 07:50:22PM +0100, Gerrit Heitsch wrote: >>> The test circuit has UM6502 currently, so >>> some modification is needed, I guess (I even don't know if 8501 needs two >>> phase clock or not, etc). >> >> The 8501 needs only PHI0. But, in order for R/_W to work properly, >> you also need to supply a clock signal to the GATE IN pin. In the >> C16, they use the MUX-signal for that. > > Ouch, that's new for me, I mean "gate in". Is there any information how can > I use that? I still haven't completly figured out how that signal works, but it has something to do with the R/_W signal and the variable clock frequency of the 8501. > Probably better to > stay with UM6502 for me, it seems ... There are tons of tips for that for > creating a minimal 6502 based system, and not so much worth just for an > on-CPU I/O port, which was the reason I've started to think on this. Again, the ideal chip for a minimal 6502 system is a 6532 since it will supply you with lots of I/O, timer and 128 Bytes of RAM. That means all you need is the 6502, a 6532, an EPROM and possibly one or two 74LSxxx. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2013-02-04 16:00:05
Archive generated by hypermail 2.2.0.