Hi, I upgraded my system to Xubunto 12.04 and also compiled a new version of opencbm (0.4.99.94) to use it with a xu1541 adapter and an Oceanic OC-168N with original 1541-II-ROM, a combination that worked flawlessly on the old install. Problem is, it doesn't work now: # cbmforng -v 8 test,00 cbmforng: NO PLUGIN DRIVER! # cat /etc/opencbm.conf ; This is a GENERATED FILE! - DO NOT EDIT! ; Modify the files in /etc/opencbm.conf.d instead, ; and execute '<removed>'... [xu1541] location=/usr/local/lib/opencbm/plugin/libopencbm-xu1541.so [plugins] default=xu1541 # ls -l /usr/local/lib/opencbm/plugin total 44 -rw-r--r-- 1 root root 19786 May 23 20:47 libopencbm-xu1541.a lrwxrwxrwx 1 root root 22 May 23 20:47 libopencbm-xu1541.so -> libopencbm-xu1541.so.0 lrwxrwxrwx 1 root root 30 May 23 20:47 libopencbm-xu1541.so.0 -> libopencbm-xu1541.so.0.4.99.94 -rwxr-xr-x 1 root root 23584 May 23 20:47 libopencbm-xu1541.so.0.4.99.94 Using 'strace' shows it opening the library but then it quits with the error message schown above. 'cbmctrl dir 8' just does nothing. I also get the following in 'dmesg' when I plug in the xu1541: hub 3-0:1.0: unable to enumerate USB device on port 1 usb 3-1: new low-speed USB device number 10 using ohci_hcd 'lsusb' lists it properly: # lsusb [...] Bus 003 Device 010: ID 0403:c632 Future Technology Devices International, Ltd xu1541 c64 floppy drive interface No hub is used. The last install (10.04) used 'opencbm-6f55387' which worked fine but wouldn't compile on 12.04. Anyone here have an idea what I'm missing or doing wrong? To me it looks as if the software is OK, the hardware is OK, but they just don't talk to each other. Gerrit Message was sent through the cbm-hackers mailing listReceived on 2012-05-24 18:00:05
Archive generated by hypermail 2.2.0.