If you're willing to run dos then check out Nick Coplins 64HDD software. It's been around for years and is an excellent program with a lot of features. His website is http://www.64hdd.com Mike Sent from my iPhone On 26/04/2011, at 6:01 PM, GÃ¡bor LÃ©nÃ¡rt <firstname.lastname@example.org> wrote: > Hi All, > > I would like to use my PC (running Linux ...) as an 1541 which can be > accessed by CBM machines (C64 and C64 DTV - my DTV is already modded so it > has got an IEC serial bus and it's tested: it works with a real 1541) as a > regular 1541 drive. I tried to google a bit but what I found was only the > way to connect an 1541 drive to the PC, but I have different need: I want to > to connect a CBM machine to my PC which acts like an 1541 (no additional > software needed on the CBM machine side) then. Has anyone an idea about > this? I have to build some kind of cable to connect for example parallel > port of the PC to the IEC connector of the CBM machine, but since I could > not find any project for this, I even don't know which cable should I build > and what software I can use at the PC side. > > Thanks in advance, > > - GÃ¡bor > > Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2011-04-26 09:00:17
Archive generated by hypermail 2.2.0.