One last bit... I found this set of instructions on http://landover.no-ip.com/pet/forum/index.php?topic=196.0 "...This is a relatively simple change. ...To go from PAL to NTSC you need to swap the MOS 6569 for a 6567, close LK5, open LK4, and swap the crystal at Y1 for the 14.31818MHz one. Lastly make the color adjustment with the small trimmer until you get good color. Make the adjusments VERY SLOWLY with a non-metallic tool. .." Bill Message was sent through the cbm-hackers mailing listReceived on 2009-07-06 03:51:46
Archive generated by hypermail 2.2.0.