On Wed, Jun 3, 2009 at 4:37 PM, Luke Crook <firstname.lastname@example.org> wrote: > I was wondering if the Rabbit, with its use of the cassette port, had any > particular advantage over other software only turbo tape utils. I guess I don't understand where that signal is going into the cartridge, and the PET Rabbit has no such attachment. Sorry for the confusion. > I have scanned+OCR'ed the Rabbit CBM64 manual. I'll put it online soon. I should do the same with the PET Rabbit manual. Mine is somewhat chewed up, but the contents should be legible. > I have an Aprospand card expander, a Cardco Cardboard 5 cart expander, and > an MMC Replay. Can any of these be used to dump the cartridge? I think I > read somewhere that the Aprospand can be used for this purpose, in > conjunction with some basic code. I don't know. I don't have any of those devices. I usually just dismantle cartridges and read the ROMs in an EPROM burner (and reverse-engineer the boards if they have any parts besides the ROMs and maybe a '138 as an address selector). -ethan Message was sent through the cbm-hackers mailing listReceived on 2009-06-03 23:06:24
Archive generated by hypermail 2.2.0.