Well, it seems I've bricked the drive.  I desoldered my leads from the  
daughterboard and I still get the infinitely spinning disk on power  
up.  The only other possibility I can think of is that I nuked the  
6502 while desoldering it.  Anyone know a good source for components?

Thanks,

Justin

On May 25, 2009, at 13:42 , Justin wrote:

> Hey all, I'm hoping someone can point out an obvious error here with  
> my supercard install in a 1541-II.  I desoldered the 6502 and  
> soldered in the daughterboard, and put the 6502 in the socket.  I  
> attached the leads to what I believe are the correct pins on the  
> 1541-II controller board, but on power up I get a constant spinning  
> disk and the drive light never turns off.
>
> I've posted photos of both sides showing my install to the following  
> links.
>
> http://rapidshare.com/files/237129024/PICT1660.JPG.html
> http://rapidshare.com/files/237129848/PICT1664.JPG.html
>
> TIA,
>
> Justin
>
>      Message was sent through the cbm-hackers mailing list


       Message was sent through the cbm-hackers mailing list