From: B Degnan (billdeg_at_degnanco.com)
Date: 2006-06-30 19:53:19
I should add...I have completed all of the standard stuff with re- seating the chips and verifying the wires. I have a similar drive that I can compare with to verify that the wiring is complete. bd > >Hi - > >I am working on an 8050 disk drive. When I power it on, (usually) both >drives spin briefly. Rather than the normal green-red-green flash pattern >to indicate a healthy drive; the diskette lights "freeze" red and the center >light "freezes" green. After a three or so seconds the drive 0 light starts >to blink slowly. The drive 1 light stays solid red, the center light >remains solid green. Any ideas? I am looking into it on this end, but I >thought I'd ask here too. > >The drive is the type with the flip doors, not the normal press and lock >mechanism. > >Bill D > > Message was sent through the cbm-hackers mailing list > > Message was sent through the cbm-hackers mailing list > -- E N D -- Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.