Re: RE: Help needed with PET 2001

From: Nicolas Welte (
Date: 2006-06-09 08:40:43

> -------- Original-Nachricht --------
> Datum: Fri, 9 Jun 2006 07:34:33 +0200
> Von:
> > Furthermore: on the user port of the PET you can extract a composite
> > video signal.
> That is a good option, but may be a better one: what about connecting 
> anpther CBM monitor? IIRC the 2001 has the same pinouts as all newer CBM 
> series so you should be able to connect thew monitor of a CBM 8032 for 
> example. 

Careful! the sync polarities can differ between monitor models, and you have to make sure these are correct. 

I have a circuit for connecting an external CGA monitor to the userport on, but all units I made are sold out. But with a multisync monitor and some luck, you don't need the buffering and the inverters, and a simple cable connection will do as well.


       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.