From: Claus Just Rasmussen (Claus_at_just-rasmussen.dk)
Date: 2006-04-03 20:09:08
Hi Nicolas,
I tried - not good ;-)
imgrd -i 0 -t 0 -f 40 c:\diskette
It went quickly through the disk (selected drive 0), wrote "0" at each
sector (what's the numbers?), created a F80 file in current dir and died
- after it read t35, I got the normal "Status:" line, but at that time
nothing happened and the 4040 statusled went Red + the drive 0 was still
red.
I then powered the 4040 off, then on which resulted in a normal green
led on the 4040 + imgrd exited with an ibcmd error, liberr 2 - no listener.
//Claus
Claus Just Rasmussen wrote:
> Hi again,
>
> Did the test with the disk with problems - and the exact result:
>
> ibcmd ERROR
> ibsta=&Hc170 < ERR TIMO CMPL REM CIC ATN >
> iberr = 6 <Op. aborted>
> ibcnt = 0
>
> I then retried with the no-timeout option enabled. Worked like a charm
> - copyed the whole disk! The old version timed out.
> (it's still creating these funny files: I'm asking it to do
> c:\diskette, which it does. Size=4166 bytes, and I also get an F82
> file in current directory, which has the correct size and is the file
> that contains the image. Not a problem at all, not that I know it, but
> funny :-)
>
> AND this new version allowed me to rescue the disk - fantastic! I'm
> really happy about that! Thanks!!
>
> I'll be checking out 4040 asap.
>
> Cheers
> Claus
>
>
> Nicolas Welte wrote:
>> I made a new version of my transfer program. It can be downloaded here:
>> http://people.freenet.de/x1541/060402.ZIP
>>
>> I added two options:
>> -t
>> -f
>> They control the GPIB timeout and the disk format. e.g. -t 0 will
>> disable timeout, -t 13 is the default (10s). -t 11 is the minimum
>> that works here (1s) and -t 17 is the maximum the driver offers,
>> beside the disable option.
>> -f 40 will select 4040 format. It is pretty untested, because I don't
>> have a working 4040 drive. Currently it creates images with the
>> correct size with my 1001, but with the incorrect filename extension.
>> Rename to d64 manually :) Please let me know if it works with a 4040.
>> I didn't touch the 6502 code that is downloaded to the drive yet,
>> because the code is *very* simple, it *might* work on the 4040.
>>
>> Nicolas
>>
>>
>> Message was sent through the cbm-hackers mailing list
>>
>>
>
--
------------------------------------------------------------
Claus Just Rasmussen, BSc.EE.
www.just-rasmussen.dk
------------------------------------------------------------
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail pre-2.1.8.