Re: How good is "disksuck" by Highlander/FLT ?

From: Richard (legalize_at_xmission.com)
Date: 2006-03-02 02:54:46

In article <F9A35E65-05D6-461F-A956-19B58D900697@inet.com.pl>,
    silverdr@inet.com.pl  writes:

> Unfortunately I don't know the answer to your question but got  
> interested in what prevents you from using the more common solutions.  
> I mean XM/XA cable, Warpcopy, C2N232 or so. I mean what problems you  
> have there so that you are "struggling" rather than doing it. I  
> presume you are not trying to archive the heavily protected originals?

I know in my case the thing holding me up is that there is no pre-made
(or kit form) hardware available for purchase which puts me in the
position of having to try and make my own hardware.  At the moment,
I'm investigating using IEEE-488 to either a Sun workstation or a PC,
but I haven't hooked things up yet.
-- 
"The Direct3D Graphics Pipeline"-- code samples, sample chapter, FAQ:
          <http://www.xmission.com/~legalize/book/>
             Pilgrimage: Utah's annual demoparty
                <http://pilgrimage.scene.org>

       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.