Re: VS: Re: SX-64 compatibility

From: Mark Street (
Date: 2005-02-19 17:17:28 wrote:

> I have a AR V, and it works very fine with my SX-64 (fin/pal). However, I've noticed that on some systems where the expansion port connector is dirty or oxidized, the AR gets very unstable. I'd try cleaning the connectors on both devices.


The cartridge port sits on the top of the SX-64 so it's likely that it's 
accumulated all sorts of dirt over the years.  It's much more exposed 
compared to a normal 64.

I noticed one of the pins was missing from the connector on the I/O 
board, but this seems to be unconnected on the PCB.


Mark Street - Marconi Communications Limited, Coventry UK.
Key fingerprint = 69BF 9043 DEA8 4AF6 2B83  D02A 42AF 67EF DF62 04FB

       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.