Larry Anderson wrote:
>
> Larry Anderson wrote:
> >
> > Levente Hársfalvi wrote:
> > >
> > > Hi!
> > > Try disabling ECP and/or EPP mode of your parallel port. After doing
> > > that, it should work fine.
> > >
> > > Levente
> >
> > I Hope this is a BIOS setting, cause I don't have any docs on this board.
> > --
> Nothing in BIOS, (I have a used 486/66) nothing on the card(except
> port/interrupt jumpers), plugged a second IO card (to get a second LPT port)
> and tried that, no go, re-wirewd a new cable, still nada... Man, I hate IBM clones!
ECP/EPP port options are in the BIOS, and as I recall didn't start to
appear until the Pentium.
So, no concern for this with a 486 MB.
--
___ ___ ___ ___ ___
/ //_/ // / // / //_/ //
Howard Herman / ___ // / //___ / ___ //
hlh@panix.com /_// /_// /_____// /_// /_//
-
This message was sent through the cbm-hackers mailing list.
To unsubscribe: echo unsubscribe | mail cbm-hackers-request@dot.tcm.hut.fi.
Archive generated by hypermail 2.1.1.