Well took time out on my pet project to hack together a working c64. Three boards and a lot of sloppy solder later I managed to turn 3 part boards into a working unit inside a Vic case. I plugged my eprom programmer in, dug out a 1541, popped in the disk viola. The problem is I am getting some very wavy video, sometimes clean sometimes with interference (almost snow like) Is this the Vic chip? I replaced the last one today I hope not, or should I check some of the video out circuitry? I think I can bare it enough to figure out how to work the Datel programmer. But any replies would be welcome my eyes :-) Thanx, Dougk email@example.com firstname.lastname@example.org -- Doug Kalley email@example.com
Archive generated by hypermail 2.1.1.