Hello Piotr,
As I don't own a 1541-II, I cannot help you, but I'm forwarding your
message to the cbm-hackers mailing list. I assume that you want to
install a three-position switch for the write protect sensor. One
position would be the normal one, and the other two would make the drive
believe that the disk is write protected, or it is not, regardless of
what the sensor sees. You'd probably need to flip the switch when
changing disks, since the drive uses the write protect sensor also for
detecting disk changes.
Marko
Piotr Stankiewicz wrote:
> Hello!
> My name is Piotr Stankiewicz, and you don't know me ;)))
> I have heard about you from page about 1541 tricks... (remember that?;)
> So I have a little problem... You wrote about 1541 write LED, but i
> have 1541-II, and there is no resistor 51 or 52!!!!!!! Maybe you can
help me?
> I searched net for service manuals and other things, but without any results!!!
> Thank you!!!
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail 2.1.1.