http://vintagecomputer.net/commodore/2001-8/2001-8_sn20343.jpg 20343 I too have black wire(s) on the filter cap as you describe coming around from an unseen origin. Is it as simple as all of the red so on one side, black on the negative? I am looking through what I have for the schematics for this model, until then I am just guessing. Bill On Thu, Nov 7, 2019 at 4:36 PM Santo Nucifora <santo.nucifora_at_gmail.com> wrote: > I also have another model of 2001-8 that has an extra black wire clustered > with the other black wires on the filter cap. It goes to the power socket > under the transformer so I can't see where it goes but I would assume the > negative terminal? > > What is your serial number range? The one I took pics of was 100895 so > that one is kinda early. > > > On Thu, Nov 7, 2019 at 4:27 PM Bill Degnan <billdegnan_at_gmail.com> wrote: > >> Unfortunately I don't think we have the same model, here is what I have >> not mine but same transformer) >> http://www.8bit-homecomputermuseum.at/repair/bluepet/bluepet.html >> >> Bill >> >> On Thu, Nov 7, 2019 at 4:18 PM Bill Degnan <billdegnan_at_gmail.com> wrote: >> >>> >>> >>> On Thu, Nov 7, 2019 at 3:46 PM Ville Laustela <ville.laustela_at_gmail.com> >>> wrote: >>> >>>> >>>> Here are two crops from my old photos, perhaps these are of some use: >>>> https://postimg.cc/VSR5yLqp >>>> https://postimg.cc/GHW4Gf37 >>>> >>>> — >>>> Ville >>>> >>>> >>> These photos are from a newer model, but thanks anyway. >>> Bill >>> >>Received on 2020-05-29 23:32:05
Archive generated by hypermail 2.3.0.
