Multi-ROM built, what now?

Hallo allemaal,
 
 
Yesterday I sent an email from home but this morning I didn't see it in my box. So once again...
 
I finished building the hardware enabling me to choose a ROM combination. This can be done using an extra 6522. This also means I can implement a ROM that needs more than the standard 16 KB using the paging method. But now the question: where can I use it for?
 
I have give it a thought myself and had some ideas but none that brought me in the "YES !!!" mood:
- using the experience I have with 1541IDE to couple a harddisk directly to a VIC-20. 
- a Pascal or C interpreter/compiler instead of of BASIC
- integrating BASIC 7.0 
- LUnix or André's GeckoOS
 
I'm also busy with soldering an ISA interface so the software for coupling a harddisk directly to a VIC-20 has to be programmed anyway but then I will use the memory available on the ISA bus. As I will use a 65816 as well, no paging needed.
 
So your input is more then welcome !!!
 
 
Then especially for Boisy: where can I get your PCB? The VIC-20 has a 6502 so replacement shouldn't be a problem. TIA!
 
 
--
     ___
    / __|__
   / /  |_/     Groetjes, Ruud Baltissen
   \ \__|_\
    \___|       http://Ruud.C64.org



  
 
De informatie in dit e-mailbericht is vertrouwelijk en uitsluitend bestemd voor de 
geadresseerde. Wanneer u dit bericht per abuis ontvangt, verzoeken wij u contact op te 
nemen met de afzender per kerende e-mail. Verder verzoeken wij u in dat geval dit 
e-mailbericht te vernietigen en de inhoud ervan aan niemand openbaar te maken. 
Wij aanvaarden geen aansprakelijkheid voor onjuiste, onvolledige dan wel ontijdige 
overbrenging van de inhoud van een verzonden e-mailbericht, noch voor daarbij 
overgebrachte virussen.

APG Algemene Pensioen Groep NV is gevestigd te Heerlen en is ingeschreven in het 
handelsregister van de Kamer van Koophandel Limburg onder nummer 14099617


The information contained in this e-mail is confidential and may be privileged. 
It may be read, copied and used only by the intended recipient. 
If you have received it in error, please contact the sender immediately by 
return e-mail; please delete in this case the e-mail and do not disclose its 
contents to any person. We don't accept liability for any errors, omissions, 
delays of receipt or viruses in the contents of this message which arise as a 
result of e-mail transmission.

APG Algemene Pensioen Groep NV is registered in the trade register of the Chamber 
of Commerce Limburg, The Netherlands, registration number: 14099617


       Message was sent through the cbm-hackers mailing list