Looking for CBM 610 (or similar) compatible Molex plug for PSU

From: Ethan Dicks <*ethan.dicks_at_gmail.com*> Date: Thu, 24 Jan 2013 17:01:35 -0500 Message-ID: <CAALmim=TQj27xMQSknmSZabxBmFtDM3mKP511vdEr6Ygj4vwQg@mail.gmail.com> · ethan.dicks_at_gmail.com

Hi, All,

With the recent CBM 610 debugging discussion, I wanted to ask if
anyone knows where to get a Molex plug that will fit with the one on
the motherboard.  I have a bare board that a list member sent me some
time ago that I haven't had the right cable to power it up with.  I
don't have an empty (or even full) chassis and they aren't that common
in the States.  I know I can unsolder the plug and replace it with
something that suits me (like a plug and cable that mates with an ATX
PSU) but I thought I'd ask if there is an easy way to find (in the
States) a connector that mates with the original.  I'm used to 1-row
Molex connectors, but not how to spec the 2-dimensional connectors
with D-shaped and inverted-D pin shells.

Thanks,

-ethan

       Message was sent through the cbm-hackers mailing list