Re: Using ST-225 in a CBM D9090 hard drive

Ruud_at_baltissen.org
Date: 2006-10-01 12:51:34

• Next message: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Previous message: B. Degnan: "Using ST-225 in a CBM D9090 hard drive"
• In reply to: B. Degnan: "Using ST-225 in a CBM D9090 hard drive"
• Next in thread: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Reply: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hallo Bill,


> .....
> 19441 blocks free

Almost exactly the same story over here. I have four 9060's (three ex-
Anders) and one 9090 laying around. Non of them was working. Using the 
board of the 9090 (which was flashing once the first time I powered it up 
????), the middle board of one of the 9060's and a Miniscribe 8425F I got a 
working combination, just ten minutes before I read your email. 

Finally having a complete working combination after two months, I can test 
the other stuff :)

Regarding the one flash, if it should turn out a ROM error indeed, at least 
I have plenty of them :)


--
    ___
   / __|__
  / /  |_/     Groetjes, Ruud
  \ \__|_\
   \___|       http://Ruud.C64.org





       Message was sent through the cbm-hackers mailing list

• Next message: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Previous message: B. Degnan: "Using ST-225 in a CBM D9090 hard drive"
• In reply to: B. Degnan: "Using ST-225 in a CBM D9090 hard drive"
• Next in thread: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Reply: Anders Carlsson: "Re: Using ST-225 in a CBM D9090 hard drive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Archive generated by hypermail pre-2.1.8.