Re: C65 RAM Expander

From: Daniele Gratteri (daniele_gratteri_at_inwind.it)
Date: 2003-09-24 21:21:29

----- Original Message -----
From: "Richard Lagendijk" <r.lagendijk@hccnet.nl>
To: <cbm-hackers@cling.gu.se>
Sent: Wednesday, September 24, 2003 7:27 PM
Subject: Re: C65 RAM Expander


> RE: C65 RAM ExpanderI've uploaded a picture of my C65 Ram Expander to:
>
> http://home.wanadoo.nl/cip/C65RAMExpander.jpg
>
>
> I took my multimeter and found out that the pins 3 to 9 and 11 to 17 are
> connected to each chip on the same pins
> Pin 10 is the VCC and pin 20 is the GND
>
> Could this help?

Here (http://www.heimcomputer.de/comp/c65.html) there is an image of a C65
expander like your one but, unfortunately, it isn't possible to read the
chip codes :-(
But there is also written who owns that machine (Todd Elliot): you may try
to contact the webmaster and ask for his e-mail.
  ___                                                          __
 / __|___  Daniele Gratteri, Italian Commodore-Amiga user...  ///
| /  |__/  Nickname: FIAT1100D - ICQ: 53943994           __  ///
| \__|__\  Home page: http://www.gratteri.tk             \\\///
 \___|     E-MAIL: daniele@gratteri.tk     ...since 1990  \///


       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail pre-2.1.8.