From: Daniele Gratteri (daniele_gratteri_at_inwind.it)
Date: 2003-03-19 07:43:50
----- Original Message ----- From: "William Levak" <firstname.lastname@example.org> To: "CBM Hackers" <email@example.com> Sent: Wednesday, March 19, 2003 5:37 AM Subject: Re: About the Datassette update > There is a 1984 Techtopics that list changes to the board. It should be > on funet somewhere. C4 is changed to 470pF and C9 (.0033uF) is added > across R1 and R2. I know, it is the one in the link I posted. But, how can I identify the resistors? There's written nothing on the PCB... I downloaded a schematic and I think I have found the right resistors but they are connected differently to the AN6562: could it be because my PCB is the NP-090B while the schematic refers to the NP-090? My NP-090B PCB uses two AN6562 op. amp. and a 74LS14. __ ____ /// Daniele Gratteri, Italian Commodore-Amiga user / ___|____ __ /// E-MAIL: firstname.lastname@example.org RITMO S75 | | |___/ \\\/// Nickname: FIAT1100D - ICQ: 53943994 FOREVER! | |___|___\ \/// URL: http://spazioinwind.libero.it/danielegratteri \____| Message was sent through the cbm-hackers mailing list
Archive generated by hypermail 2.1.6.