RE: 22/22 0.1" Expansion port Connector
Date: 2002-10-18 14:22:03

Hallo Gideon,

> Do I really need to disassemble old C-64's for this?

<devilish grin on> In the very early days I scapped some Speccies to get
these connectors and removed some pins <devilish grin off>

People interested in the GZ often own more then one C64 and most probably
have some scrap ones for spare parts. With your 40 pin connectors the GZ can
be used for other non-C64 machines. So simply let the owner decide wether or
not to add this connector.

The GZ fits in one of the Zorro-slots of the C=1. But I wonder if there is
room for another card on top of the GZ. IMHO this one must be place in a 90
angle. And in that case you can use XT/AT ISA-slots.

I will look for at least two C64-connectors and will give them to you

   / __|__
  / /  |_/     Groetjes, Ruud
  \ \__|_\


       Message was sent through the cbm-hackers mailing list

Archive generated by hypermail 2.1.4.