On Fri, 21 Dec 2001, Baltissen, R (Ruud) wrote:
> Hallo allemaal,
>
> Maybe OT but I assure you that these drives end up in service of my
> Commodores in one or anther way.
>
> I have been given a small cabinet containing two SCSI-HDs. I took an old 486
> from the shelf, inserted a SCSI-controller and checked and formatted the
> drive. Now I was curious if I could use these drives under DOS as well
> alongside the native IDE-system. But FDISK didn't even see the drives.
>
> What must I do so DOS will see these drives?
If the controller does not have a BIOS on it, you need a driver. In
addition, some SCSI devices require the ASPI driver. There are several
versions on the internet.
Message was sent through the cbm-hackers mailing list
Archive generated by hypermail 2.1.1.