I will try to remember the questions I posted earlier, this time with no 'raw' tags. - What's the minimum work unit of the VASYL: the bit (pixel) or the byte (char line)? - Can the VASYL memory replace the C64 memory so the VIC-II uses the former instead of the later? - Who's refreshing the DRAM once the beamracer is installed? - Who's providing the system clock once the beamracer is installed? - Can the VASYL isolate the VIC-II from the system so the C64 can run as if it wouldn't have a VIC-II installed? - Can the beamracer work by itself with the VIC-II with no need of the rest of the C64? (asumming it's powered and/or clocked as needed) also... - Can the VASYL make the VIC-II switch between different color modes in a *single* raster line? - Can the VASYL make the VIC-II switch between different color modes in alternate raster lines? - Can the VASYL be used to expand the borders so a resolution higher than 320 or 200 can be achieved? and finally... - Could a kernel mod, or a new kernel, make the VASYL make the VIC-II work in 400x200 resolution, by expanding for 40 pixels or 5 char columns each side, so it would enable an 80 column mode with a custom charset of 5x8 fonts? -- Sent from: http://cbm-hackers.2304266.n4.nabble.com/Received on 2020-05-30 01:58:32
Archive generated by hypermail 2.3.0.