> On 2020-03-25, at 16:35, Spiro Trikaliotis <ml-cbmhackers_at_trikaliotis.net> wrote: > > [...] > Thus, if your setup allows one switched off controller, the procedure > can be: > > 1. Switch on all drives and computer 1 > 2. If it is a C64, do the LOAD (or the POKE) as given above > If it is a C128, wait until the boot access has stopped and you see > the power on message > 3. Switch on the other computer 2 > If it is a C64, do the LOAD (or the POKE) as given above But if computer 1 has the board with RESET passed through then you'd need to do the LOAD from there again, which wouldn't work because computer 2 would be holding the line ;-) So I guess the safest would be to do the POKEs (rather than LOADs) on both computers, after everything is turned on. -- SD!Received on 2020-05-30 01:23:13
Archive generated by hypermail 2.3.0.