Re: HMOS VIC sparkles

From: silverdr_at_wfmh.org.pl
Date: Sat, 27 Jul 2019 00:13:14 +0200
Message-Id: <CE3283E5-35E9-40FF-AD12-98F0FDFD3E66_at_wfmh.org.pl>
> On 2018-03-15, at 14:24, Segher Boessenkool <segher_at_kernel.crashing.org> wrote:
> 
> On later C64 machines the CS line to VIC goes active earlier, causing
> the sparkles.  A little cap (from CS to ground) solves this.  There is
> no difference between the 65xx and 85xx VIC here.
> 
> (You get the sparkles because the internal data bus on the VIC is
> precharged; if CS is too early you get that value instead of the value
> on the data bus written to the colour regs, for a little while that is,
> half a pixel or so.  And the precharged value is 0b1111, light grey).

.. I just had a discussion about those sparkles with a friend and couldn't authoritatively answer. Because if the above is true, then the sparkles should be visible regardless of which VIC is being used, right? You mention yourself that "there is no differnce between 65xx and 85xx here". Or is this 0b1111 only inherent to HMOS VICs? The reason I ask is because I recall "fixing" the sparkles in one machine decades ago by doing some wiring and running 6569 in the narrow board. I don't think I delayed the CS (back then I surely didn't have any idea about what was causing them to appear).

-- 
SD! - https://e4aws.silverdr.com/
Received on 2020-05-29 22:21:09

Archive generated by hypermail 2.3.0.