Do I have to use an 100ohm resistor one the line like I did for the 2001N? Sent from my iPhone > On Apr 6, 2019, at 11:56 AM, David Roberts <daver21145_at_gmail.com> wrote: > > J4 pin 22 is /RESET. > > J4 pins 1, 25 and 26-50 are GND/0V. > > http://6502.org/users/andre/petindex/pinouts.html#memj4 > > Make the connection from pin 22 (/RESET) to any convenient GND pin to reset the PET. > > This should be valid for a standard 8032, the universal and the universal 2. > > Just check the pinouts I have referenced just in case of a typo. error... > > Dave > > >> On Sat, 6 Apr 2019 at 15:52, vossi <vossi_at_ceffy.de> wrote: >> Its very easy in the 8032. You only need a switch that connects reset and >> ground at the long pinheader at the right. Look in the schematics... >> >> >> >> ----- >> greets >> Christian >> -- >> Sent from: http://cbm-hackers.2304266.n4.nabble.com/ >>Received on 2020-05-29 21:10:34
Archive generated by hypermail 2.3.0.