On Tue, Apr 24, 2018 at 10:47 PM, vossi <vossi@ceffy.de> wrote: > Thanks to Rob I found the error at the RAM from 2000-2FFF and replaced both > 2114. > Now the drive has no flash code anymore. > I can access to it with my 8032sk. > But if I try to format with the header command it always gives me a "bad > disk". > I tried both drives and different discs (DS, DD, soft sectored). > The errorcode says number 26 = write protect - but all disks (some new ones) > have no hole = write enabled! I would look at the sensors for the write protect hole and see if they work and follow the signals until they reach an input pin. I have never seen a real 8280 of course... just guessing. FrankReceived on 2018-04-25 00:00:03
Archive generated by hypermail 2.2.0.