Re: 1571 (128D) spindle speed adjust?

From: Francesco Messineo <francesco.messineo_at_gmail.com>
Date: Wed, 20 Dec 2017 15:37:19 +0100
Message-ID: <CAESs-_yWu269SA8ZhAr4N3624f_afJS5L95TiC-T+pjSYMzq+g@mail.gmail.com>
On Wed, Dec 20, 2017 at 2:46 PM, Pete Rittwage <peter@rittwage.com> wrote:
>> Hi all,
>> is it just me or there isn't a clear way to check and adjust the
>> spindle speed on an internal drive of the 128D?
>> The drive is still quite marginal but I can't find any way to either
>> check or adjust the spindle speed which should be 300 rpm as always.
>> Thanks
>> Frank
>
> No, there is no way to adjust speed on that mechanism.

ok, the drive operation is too marginal, a very few medium ever start
to format, almost noone goes past track 20, most stop at track 10-14,
so if it's not the disk speed, what else might be? Sometimes the drive
reads/write normally, but it's really too random...

I'm out of ideas

       Message was sent through the cbm-hackers mailing list
Received on 2017-12-20 15:00:02

Archive generated by hypermail 2.2.0.