What's wrong with one of these (in stock at Mouser): https://b2b.harting.com/ebusiness/en_us/DIP-KONTAKDON-40-POL-SEK/09170409622 Failing that, Steve has a little breakout board for his VMD project; in addition to just the address pins it also brings out all 40 pins along the edges: http://www.6502.org/users/sjgray/projects/vmd/index.html m ----- Original Message ----- From: "didier derny" <firstname.lastname@example.org> To: <email@example.com> Sent: Monday, August 21, 2017 5:09 AM Subject: replacing the cable between the 64 extension for the commodore 8000 > Hi > > I have a commodore 8032 motherboard > and a 64k extension but the cable is missing > > I've not found any schematics for the 64k extension... > I guess the cable is 1 to 1 except for VCC (+5v) ? > any idea where I could find the components ? > specially the connector to plug in the 6502 socket ? > > > I'm thinking to make a a small board to plug on the 6502 socket > and use a standard connector for the cable... > > thanks > > > > > > > > Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2017-08-21 22:00:03
Archive generated by hypermail 2.2.0.