On Thu, Aug 17, 2017 at 2:46 PM, Spiro Trikaliotis <ml-cbmhackers@trikaliotis.net> wrote: > Hello Vossi, > > * On Thu, Aug 17, 2017 at 01:17:33AM -0700 vossi wrote: > >> PS: Is it possible to use my D9060 at the OpenCBM-Interface? > > this should be possible with cbmctrl and cbmcopy Session with my D9090 $ cbmctrl reset $ cbmctrl status 12 73,cbm dos v3.0,00,00,0 $ cbmctrl detect magic = 0xcad5 magic = 0xcad5 12: *unknown*, footprint=<LJME> $ cbmctrl dir 12 20,read error,00,00,0 $ I would say the format is blown on my TM603S, or the drive is faulty. More work is needed, but at least it talks to the Zoomfloppy (v7 firmware, driving it from Linux). I do have a spare TM602S on the shelf, but not a spare TM603S. I have two D9060 drives. One comes up with solid red and green LEDs so it needs a bit of help first. The other is dismantled and so I have to put it together before I'll be able to test with it. -ethan Message was sent through the cbm-hackers mailing listReceived on 2017-08-21 06:00:02
Archive generated by hypermail 2.2.0.