Have you ever thought that the user port need was for modems and other Hardware so it was already busy and used Sent from my T-Mobile 4G LTE Device-------- Original message --------From: smf <email@example.com> Date: 6/28/2017 6:51 AM (GMT-08:00) To: firstname.lastname@example.org Subject: Re: Help with SX64 User Port? On 28/06/2017 14:13, Baltissen, GJPAA (Ruud) wrote: > The reason to discard the IEEE bus was the fact that the cables were > too expensive so they designed the IEC bus. I believe it was the connector on the motherboard that was the main problem. You could charge a fortune for a drive cable if someone wanted a drive, but you wouldn't want to lumber all the tape users with that cost. They should have just used the user port. Message was sent through the cbm-hackers mailing list Message was sent through the cbm-hackers mailing listReceived on 2017-06-28 21:00:07
Archive generated by hypermail 2.2.0.