also C48 and C93 is missing 2017-02-17 22:24 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: > @Ruud > > Found some errors in your schematic > > U31 pin 16 is missing > C68 is missing > > 2017-02-17 21:37 GMT+01:00 Bo Herrmannsen <bo.herrmannsen@gmail.com>: > >> @Silver no problemo... its no rush. I'm still getting my head to absorb >> the schematic from the Programmer's Reference Guide and schematic #326106. >> There are a few differences allready between the 2 and so far i have just >> put a circle arround them >> >> But so far RP4 and L4 is the mystery bits. L4 is just listed as a line >> filter with no values at all or any mfg code. all i know is that its 2 >> inductors in one unit >> >> RP4 is a resistor pack with one common pin, but given its listed as a 10 >> pin device there are 9 resistors inside, but i can only count 8 on the >> schematic so i guess 1 is unused. >> >> 2017-02-17 21:23 GMT+01:00 <silverdr@wfmh.org.pl>: >> >>> >>> > On 2017-02-17, at 20:55, Bo Herrmannsen <bo.herrmannsen@gmail.com> >>> wrote: >>> > >>> > @Silver >>> > >>> > When you come by the 326298 please let me know. >>> >>> As I wrote, I should have one somewhere. The keyword here is >>> "somewhere". So I might have a quick look but if it's not easily found then >>> I won't be able to dedicate enough time to dig it out. And - obviously - it >>> won't be for sale but I might check a thing or two for you if needed. >>> >>> BTW. Some time ago I had a short discussion about VIC-20 boards here. I >>> don't remember know exactly with whom but if the person who wanted me to >>> check things on those boards reads the list - please come back with your >>> question again. Seems that I managed to gather /I think/ all my VIC-20s >>> under one roof so I can check whatever you wanted to check there. >>> >>> -- >>> SD! >>> >>> >>> Message was sent through the cbm-hackers mailing list >>> >> >> > Message was sent through the cbm-hackers mailing listReceived on 2017-02-17 22:00:29
Archive generated by hypermail 2.2.0.